cinelli
contributor
Reged: 01/17/04
Posts: 107
|
|
If anyone has any information on the early 1990's Calfee/LeMond frames, I would appreciate your help.
Specifically, I am trying to determine the sizes and dimensions that were available back then. What was the largest size made and what was the top tube length?
Thanks
|
dfcas
contributor
Reged: 12/19/03
Posts: 136
|
|
Not much help,but I remember they had Italian bottom brackets until around 2000 or so.Also,the bottle braze-ons and maybe the cable stops were a clamp on style,I think.
dan
--------------------
no signature
|
nicrump
new member
Reged: 01/07/04
Posts: 42
|
|
According the ?94 Lemond catalog, the standard and high mod versions were available in 4 sizes. 52, 54, 56 and 58. I recall in at least ?93 if not ?92, 58 was the largest but I could be wrong.
edit... the TT on the 58 was 57.5
Edited by nicrump (02/27/06 09:19 PM)
|
RDP
captain
Reged: 12/18/03
Posts: 243
Loc: Kansas
|
|
An undated Lemond Bicycles catalog (probably from 91') does not list specific carbon frame sizes though the generic geometry chart shows sizes as large as 64cm (w/ a 62 cm top tube) so this particular brochure is probably an unreliable source. Craig would know what actual sizes were made for Team-Z. Of note, the brochure states, "The carbon is finished exclusively in a clear coat." The Lemond carbon pictured is kitted up w/ a Mavic gruppo (i.e. 631 crank) and black cro-moly fork.
However, the 1992 Lemond Bicycles brochure lists a specific carbon size range up to 60cm (measured c-t) with a 59 cm (c-c) top tube. These frames were available with the blue pearl tint.
--------------------
It is about the bike.....BikeFanClub Forums
|
cinelli
contributor
Reged: 01/17/04
Posts: 107
|
|
Thanks for all of the input.
|
Previous
Thread Index
Next
Threaded
Calfee/LeMond Question
Edit
Reply
Quote
[Re: