NateM
new member
Reged: 12/22/03
Posts: 15
|
|
I am looking for a 1"GS10 or Sub3, with a 1"steerer minimum 240mmm length, 41mm rake. NateMerrill
|
Darby
captain
Reged: 08/03/06
Posts: 349
Loc: Orange County California
|
|
You might check with True Temper. I bought a discontinued fork with a 1" steer from them a few years ago for $100.
Bruce
|
Marshall
new member
Reged: 06/25/07
Posts: 8
|
|
I have an old Calfee, I think probably an Alpha Q, with carbon 1" steerer, came on Tetra Custom, clear finish, in very good shape, Calfee decals, I think long enough (I replaced with Alpha Q Aero, it's my tri bike). If you are interested I will measure and/or send you a picture.
|
NateM
new member
Reged: 12/22/03
Posts: 15
|
|
Marshall,
do you know what the rake was on that fork? If you dont we might be able to figure it out by the year and size of your frame.Is your bike a custom tri bike or is it a standard Tetra build that you use for tri? I'm in a hole because no one makes a fork in 1" with the proper rake and span anymore.No need for picture but measure the steerer if you will.Thanks,Nate Merrill
|
Marshall
new member
Reged: 06/25/07
Posts: 8
|
|
Actually looks like it is 37mm, as best I can measure it. Steerer cut to 250mm, 407gm with Chris King baseplate and insert glued into steerer. Came with Tetra Custom frame, 63cm, 76.5 deg seat tube, 60cm top tube, serial 63CP1078.
|
Previous
Thread Index
Next
Threaded
WTB Alpha Q 1" fork
Edit
Reply
Quote
