High-end Custom Bicycles >> Calfee Design Fan Club Previous   Thread Index   Next   Flat

nKhona new member Reged: 12/07/05 Posts: 5 Loc: Dallas, TX Inner Chainring Rub       12/07/05 04:00 PM (205.144.50.183) Edit   Reply   Quote   First a bit of background...I recently bought a 56cm Tetra Pro frame, a 1997 model I think, and with it came a Dura-Ace BB (70x109). I also bought a Shimano Ultegra group to build the bike out. So the problem I am having is installing the FC-6500 crankset (172.5 39/53), when I tighten the crank bolt the inner chainring of the crankset will contact the chainstay. Do I need a spacer? wider BB? different crankset? If you are a visual person here are some pics of the crankset on the bike: Crankset close to chainstay BB Splines Any help is appreciated!! -------------------- Dan Post Extras

Entire thread Subject Posted by Posted on Inner Chainring Rub nKhona 12/07/05 04:00 PM bb spindle length NateM   12/09/05 05:46 PM NKhona dfcas   12/23/05 11:47 PM Re: Inner Chainring Rub Dave_Thompson   12/08/05 12:33 AM Re: Inner Chainring Rub Lon   12/07/05 06:32 PM Re: Inner Chainring Rub nKhona   12/07/05 06:54 PM Re: Inner Chainring Rub dfcas   12/07/05 07:55 PM Re: Inner Chainring Rub nKhona   12/09/05 05:47 AM Re: Inner Chainring Rub Allan   01/05/06 03:16 AM Re: Inner Chainring Rub Dave_Thompson   01/05/06 05:05 AM Re: Inner Chainring Rub Allan   01/08/06 03:25 AM Re: Inner Chainring Rub Dave_Thompson   01/08/06 05:29 AM Re: Inner Chainring Rub Allan   01/08/06 02:54 PM Re: Inner Chainring Rub dfcas   12/09/05 02:29 PM Re: Inner Chainring Rub nKhona   01/03/06 02:41 PM Re: Inner Chainring Rub dfcas   01/03/06 07:36 PM Re: Inner Chainring Rub nKhona   01/03/06 09:00 PM

UBB.threads™ 6.4