High-end Custom Bicycles >> Calfee Design Fan Club Previous   Thread Index   Next   Flat

NateM new member Reged: 12/22/03 Posts: 16 bb spindle length       12/09/05 05:46 PM (170.20.11.116) Edit   Reply   Quote   I have a 97 Tetra and when using a 9sp DA crank I used a 112.5mm XTR spindle in a Italian DA BB.I still had to use a 1mm spacer to get clearnace.I switched to a carbon FSA crank and was able to remove the spacer.I now use the mega exo BB with FSA compact and there is plenty of room.Dave Thompson might know if the spacer will work with a 109.6 spindle? Post Extras

Entire thread Subject Posted by Posted on Inner Chainring Rub nKhona 12/07/05 04:00 PM bb spindle length NateM   12/09/05 05:46 PM NKhona dfcas   12/23/05 11:47 PM Re: Inner Chainring Rub Dave_Thompson   12/08/05 12:33 AM Re: Inner Chainring Rub Lon   12/07/05 06:32 PM Re: Inner Chainring Rub nKhona   12/07/05 06:54 PM Re: Inner Chainring Rub dfcas   12/07/05 07:55 PM Re: Inner Chainring Rub nKhona   12/09/05 05:47 AM Re: Inner Chainring Rub Allan   01/05/06 03:16 AM Re: Inner Chainring Rub Dave_Thompson   01/05/06 05:05 AM Re: Inner Chainring Rub Allan   01/08/06 03:25 AM Re: Inner Chainring Rub Dave_Thompson   01/08/06 05:29 AM Re: Inner Chainring Rub Allan   01/08/06 02:54 PM Re: Inner Chainring Rub dfcas   12/09/05 02:29 PM Re: Inner Chainring Rub nKhona   01/03/06 02:41 PM Re: Inner Chainring Rub dfcas   01/03/06 07:36 PM Re: Inner Chainring Rub nKhona   01/03/06 09:00 PM

UBB.threads™ 6.4