High-end Custom Bicycles >> Calfee Design Fan Club Previous   Thread Index   Next   Flat

nKhona new member Reged: 12/07/05 Posts: 5 Loc: Dallas, TX Re: Inner Chainring Rub       01/03/06 02:41 PM (205.144.50.183) Edit   Reply   Quote   Many thanks to dfcas (Dan), as he sent me a few spacers and after a bit of work I got them to fit! At first the spacers would not fit over my BB cup threads. Since my BB is Italian threaded it's O.D. is 36mm and the spacers I.D. was 35mm. So after reading a few more post on other forums I took a half-round file to the inside of the spacers to widen the I.D. to 36mm. Worked like a charm. I had played around with the idea of making a cut in the spacer so that I could spread it to fit, but filing the spacer worked. I used a single 2mm spacer and it was just enough to keep the chain ring from rubbing. Once again "Thank You" to dfcas! -------------------- Dan Post Extras

Entire thread Subject Posted by Posted on Inner Chainring Rub nKhona 12/07/05 04:00 PM bb spindle length NateM   12/09/05 05:46 PM NKhona dfcas   12/23/05 11:47 PM Re: Inner Chainring Rub Dave_Thompson   12/08/05 12:33 AM Re: Inner Chainring Rub Lon   12/07/05 06:32 PM Re: Inner Chainring Rub nKhona   12/07/05 06:54 PM Re: Inner Chainring Rub dfcas   12/07/05 07:55 PM Re: Inner Chainring Rub nKhona   12/09/05 05:47 AM Re: Inner Chainring Rub Allan   01/05/06 03:16 AM Re: Inner Chainring Rub Dave_Thompson   01/05/06 05:05 AM Re: Inner Chainring Rub Allan   01/08/06 03:25 AM Re: Inner Chainring Rub Dave_Thompson   01/08/06 05:29 AM Re: Inner Chainring Rub Allan   01/08/06 02:54 PM Re: Inner Chainring Rub dfcas   12/09/05 02:29 PM Re: Inner Chainring Rub nKhona   01/03/06 02:41 PM Re: Inner Chainring Rub dfcas   01/03/06 07:36 PM Re: Inner Chainring Rub nKhona   01/03/06 09:00 PM

UBB.threads™ 6.4