Bike Fan Club By Flycor, LLC

High-end Custom Bicycles >> Calfee Design Fan Club

davidlemon
friend


Reged: 09/21/06
Posts: 38
Loc: sacramento, ca
Re: chris king headset issue on calfee frames
      11/21/06 04:37 AM (68.6.95.202)

Quote:

Dave_Thompson wrote:
I suspect that your King headset came with a star nut...

...If an insert is glued into your steer tube, you can do no further cutting of the tube. With the expandable plug, the plug is easily removed if needed and can be re-inserted again.





yes. the "king" headset came with star nuts.

so, to be clear: if i have no desire to further cut my fork, i can have this insert you speak of glued into the steer tube, and then will be able to use the original "king" top cap? sounds like there's a solution, then.

ps- thanks SO VERY much for your input. i'm grateful.

Post Extras Print Post   Remind Me!     Notify Moderator

Entire thread
Subject Posted by Posted on
* chris king headsets on calfee forks davidlemon 11/21/06 03:52 AM
. * Re: chris king headset issue on calfee frames Dave_Thompson   11/21/06 04:23 AM
. * Re: chris king headset issue on calfee frames davidlemon   11/21/06 04:37 AM
. * Re: chris king headset issue on calfee frames Dave_Thompson   11/21/06 04:54 AM
. * Re: chris king headsets on calfee forks davidlemon   11/21/06 05:18 AM
. * Re: chris king headsets on calfee forks Dave_Thompson   11/21/06 05:30 AM
. * Re: chris king headsets on calfee forks davidlemon   11/21/06 06:05 AM
. * Re: chris king headsets on calfee forks Dave_Thompson   11/21/06 06:20 AM

Extra information
7 registered and 99 anonymous users are browsing this forum.

Moderator:  Kahuna 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4063

Rate this thread

Jump to

Contact Us Bikefanclub.com

*
UBB.threads™ 6.4