High-end Custom Bicycles >> Calfee Design Fan Club Previous   Thread Index   Next   Flat

dfcas contributor Reged: 12/19/03 Posts: 143 Re: Another bottom bracket question....       07/12/07 09:25 PM (72.84.42.245) Edit   Reply   Quote   I have shimmed as much as 2mm in the past.I have not,however,used the setup you are describing. If the crankset is on the bike now,you can use a 2mm allen to see if it clears between the left crankarm and the chain stay.If so,shim away.If not,and you need the right crank moved to the right,you must get a longer spindle.If you cannot find a Campy to suit,you can get a Phil Wood in any imaginable length.Note that the taper needs to be ISO,not the Japanese JIS. dan -------------------- no signature Post Extras

Entire thread Subject Posted by Posted on Another bottom bracket question.... cinelli 07/12/07 06:50 PM Re: Another bottom bracket question.... dfcas   07/12/07 09:25 PM Re: Another bottom bracket question.... cinelli   07/13/07 04:35 PM

UBB.threads™ 6.4